Universell nutzbare LED Ringleuchte HDR-300 mit 15 mm Support
-geringes Gewicht, schlankes Profil
-1950 Lux bei1 Meter
- Magnetisch, Snap-on Filter
- variabler Dimmer
- zwei Spannungsoptionen: NP-F Akku Plate (5.8-16.8V) oder DC 2.5mm (Betriebsspannung 10-18V)
-starke Lichtleistung, kompakte Maße und geringer Stromverbrauch (über optionale NP-F Akkus oder Netzteil)
- inkl. L Halterung mit Kameraplatte sowie zur Befestigung auf einem Leuchtenstativ
- 95mm Innendurchmesser
- Farbtemperatur: 5600K
- Beleuchtung (Lux): 1950 lx
- Abstrahlwinkel: 65 °
- Farbwiedergabeindex (Ra): = 85
- Leistung Variation: 0-100%
- Betriebsspannung: 5,8-16.8V
- Nominal Gewicht: 350g
- Nominale Abmessungen: 20.8x20.2x4.3 (cm)
- Innendurchmesser: 95mm
- Stromversorgung: Sony NP-F Akku Plate (5.8-16.8V) / DC 2.5mm Jack (10-18V)
- Batterielebensdauer: 45 Minuten w / NP-F550
(1) x R-300 Ring-Licht
(1) x Tungsten Filter
(1) x Streufilterset
(1) x L-Bracket
(1) x 15mm-Schienen-Montage
R300 LED Ring Light with Rail Mount
The R-300 features 300 daylight-balanced LEDs that produce 1950 Lux @ 1-meter. An onboard dimmer offers seamless power variation from 0-100%. It has two power options: a Sony NP-F Battery Plate and a DC2.5 jack (DV Battery and AC Adapter sold separately).
The R-300 has a 65° beam-angle allowing for an wide, even spread of light. It is slim in profile and light in weight making it a perfect companion for shoots in the studio or on location. The R-300 is perfect for glamour, concert, and macro photography/videography.
The R-300 comes packaged with two magnetic filters: a Tungsten Filter and a Frost Diffusion Filter. The Tungsten Filter will calibrate your light to 3200K allowing you to shoot indoors under incandescent light. The Frost Diffusion Filter takes the edge off of the light's beam and also can serve as a gel holder. Also available, is the NEW Milk White Diffusion filter which creates a very soft, glamorous, and easy-to-look-at light source.
The R-300 Ring Light comes packaged with an L-bracket. The L-bracket has a 1/4"-20 thumb screw that allows you to mount your camera for mobile use with the R-300 system. The bracket also has a 5/8" female receptacle. For hand held shooting the 5/8" female receptacle can also accept a hand grip to allow for a mobile, compact shooting solution. The 5/8" receptacle also allows you to use the light off-camera and mount the Ring Light directly onto a light stand. The R-300 Ring Light is more than just an on camera light; multiple units are easy to travel with, and can serve as a complete lighting kit.
The R-300 can also be bundled with the 15mm Rod Mount accessory. This accessory allows you to attach the R-300 Ring Light onto a standard 15mm Rod Set-up. For video shooters you can attach the Ring Light to your shoulder rig or tripod/studio set-up. The available DC jack is the perfect solution for powering your Ring Light if your shoulder rig / studio set-up also includes a V-mount battery system. Please note that the 15mm Rod Mount accessory does not include a baseplate and rod system.
The R-300 has several mounting options. Beyond being able to mount to the L-bracket or 15mm Rod Mount accessory. The R-300 can also be mounted on top of your camera; it has a 1/4"-20 thread-in on its underside for use with a ball head.
15mm Rail Mount for R-300
15mm Rail Mount for R-300 LED Ring Light. Attach you ring light onto any industry standard 15mm rail mount system. The Rail Mount is slide on and height adjustable.